Articles Blog

Cómo hacer figuras de NAVIDAD para cupcakes ⛄️🎄 || Kaomi Tutoriales

Cómo hacer figuras de NAVIDAD para cupcakes ⛄️🎄 || Kaomi Tutoriales


Hi! In this video we show you how to make
these Christmas figures for cupcakes To make the snowman’s body,
use 16 grams of gum paste, add gum tragacanth or CMC, knead well and make a ball slightly lengthen the piece and flatten the bottom flatten the top to be able to assemble the head to make the head, use 11
grams of gum paste add gum tragacanth, knead well and make a ball to make each arm, use a
gum paste ball of 12 millimeter in diameter To make it, you need a
circles millimeter ruler Lengthen the piece leaving more volume
on the bottom Flatten slightly Make a glue by mixing
gum paste with a few drops of water Apply glue on top
of the body and place the head in this place Apply glue on each arm and place them with a round tool, mark the
eye area To make the nose, use a small gum paste ball and cone-shaped Apply glue and place the nose To make the scarf, lengthen one
white piece and a red piece Interlace both pieces Apply glue on the neck and place the scarf This glue is a mixture of water.
with a pinch of gum tragacanth or CMC To make the bottom of the hat, use a
gum paste ball of 15 mm diameter , add gum tragacanth and
make a ball We use vegetable shortening to prevent gum paste
stick to fingers flatten the piece shaping a disk To make the top of the hat, use 3 grams of gum paste, add gum tragacanth and make a ball Flatten slightly shaping a small cylinder Apply glue in this place and
put both pieces together Apply glue in this place and
place a thin red strip Cut excess gum paste with scissors To make the eyes, mouth and buttons, use small balls of black gum paste With a round tool, make a
small cavity at the bottom of the hat Apply some glue on the head and place the hat In this way we finish the
Snowman Next we will make the figure of Santa Claus To make the body, use 16
grams of gum paste, add gum tragacanth, knead well and make a ball Use some vegetable shortening
to prevent gum paste from sticking to hands slightly lengthen the piece and flatten the bottom Flatten the top so can it fit the head To make the head, use 9 grams
of gum paste, add gum tragacanth, knead well and make a ball Apply glue on top
of the body and place the head on this
place To make the beard, use a gum paste ball
of 3 grams flatten triangularly and lengthen two
tips as follows Take a cutting tool and
make the following marks Apply glue in this place and
put the beard To make each mustache, lengthen a small
gum ball leaving a tip at one end then make a curve Apply glue in this place and place the mustache With a round tool make a
cavity to mark the mouth area Apply glue in this place and
put the nose Take a round tool and
mark the eyes area Apply glue in this place and place the mouth using a small ball of red gum paste To make each arm, use a
gum paste ball of 12 mm diameter, add gum tragacanth, knead well and make a ball Slightly lengthen the piece and flatten both ends The end that is attached to the body must be in shape
diagonal To make each hand, use a gum paste ball
of 11 mm in diameter Flatten slightly and
mark the thumb with a cutting tool Apply glue in this place and
put both pieces together With a scalpel cut a long strip Apply glue in this place and place a strip Apply glue on the neck area. Cover it using 3 grams of white gum paste To make the eyes, use two
small balls of black gum paste To make the hat, use 8 grams
of gum paste, add gum tragacanth and make a ball Lengthen the piece leaving more volume
at the bottom shaping a cone Make a cavity at the bottom so can it fit the head and bend the top end Apply glue on the head and place the hat Apply glue on the bottom
of the hat and place a slightly flattened long strip To make the belt, flatten a
little black gum paste With a pizza cutter, cut a tape Apply glue in this place and
place the belt Cut the excess gum paste with a scalpel Making the belt buckle, using a small yellow rectangle Apply glue on top end
of the hat and place a small ball of white gum paste Apply glue on each arm and place them In this way we finish the figure of
Santa Claus Next we will make the reindeer figure To make the body of the reindeer, use 13 grams of gum paste, add gum tragacanth, knead well and make a ball Slightly lengthen the piece and flatten the bottom Flatten the top to be able to assemble the head To make the head, use 9 grams
of gum paste, add gum tragacanth, knead well and make a ball Slightly extend this piece To make each leg, use a gum paste ball
of 11 mm diameter Lengthen them and flatten the bottom To make the end of each leg, flatten a small ball of gum paste and … … mark with a cutting tool Apply glue in this place and
put both pieces together To make the snout, flatten a small ball of gum paste of a lighter color Apply glue and place it in this place With a round tool, mark the
area of ​​each eye To make the nose, use a
small ball of red gum paste To make the eyes we use two small gum paste balls (black) To make the mouth, use a small black strip Apply glue on each leg and place them in their respective places Apply glue on top
of the body and place the head in this place To make each ear, take a small ball of gum paste and … … lengthen it by shaping a tip at one end Apply glue on the ears and place them To make each horn, use a gum paste ball of 11 mm diameter, add gum tragacanth, knead well and make a ball Slightly lengthen the piece leaving
more volume at the top From the top, shape three extensions Following the same procedure, make the other horn and let dry for a couple of hours Finally apply glue on each horn and place them So we finish the reindeer figure and I hope that
this video will help you If you liked the tutorial, subscribe and activate the bell so you can see the news we bring to you Greetings and have a Happy Holidays!

18 thoughts on “Cómo hacer figuras de NAVIDAD para cupcakes ⛄️🎄 || Kaomi Tutoriales”

  1. Gracias por compartir con nosotros tus conocimientos tus explicación son muy buenas, que pases muy fiestas y que dios de colme de bendiciones.

  2. Bonjour kaomi super creation pour les fêtes tu Est le meilleur bravo je te souhaite un joyeux noël et de belles fêtes de fin d'année 🎅🎅👍👍👏👏👏

  3. Gracias por compartir sus enseñanzas aprendo mucho de tus videos.
    Tengo una pregunta como ago para tenir las pasta de como xfvr

  4. Bom dia, sou Elenice Nunes morro no Brasil, estou encantada com o trabalho e com esta obra de arte de vcs parabéns Deus abençoe a todos. 😘❤💙

  5. Pablo que gusto verte hacer tus labores ellas y prácticas un abrazo para ustedes que Jesús reíne en sus corazones está Navidad

Leave a Reply

Your email address will not be published. Required fields are marked *