Articles Blog

How to Use Phantom Insecticide / Pesticide & Termiticide Spray

How to Use Phantom Insecticide / Pesticide & Termiticide Spray

Phantom is a powerful insecticide that controls many household pests including ants, termites, bed bugs, cockroaches, and more. To use Phantom, simply dilute the solution with the appropriate amount of water in a one gallon tank sprayer. For most general pest control applications, the recommended rate is three ounces of Phantom to one gallon of …

Articles Blog

How to Load the Protecta Landscape Bait Station | DoMyOwn.com

How to Load the Protecta Landscape Bait Station | DoMyOwn.com

To load the Protecta Landscape Bait Station, first open the station using the key. The Landscape Bait Station includes a tray for granule rodent bait, if that is the prefered method. To use bait blocks, remove the tray. Once the tray has been removed, insert the vertical rods. The Landscape Bait Station can hold up …

Articles Blog

How to Load the Protecta Keyless Mouse Bait Station | DoMyOwn.com

How to Load the Protecta Keyless Mouse Bait Station | DoMyOwn.com

To load the Protecta Keyless Mouse Bait Station, first screw the lid off. Also make sure to wear gloves when handling rodent bait. With the lid removed, simply slide the bait blocks into the center section of the station. The blocks should be placed in the station vertically. The station can hold a maximum of …

Articles Blog

How to Load the Protecta Evo Ambush Bait Station | DoMyOwn.com

How to Load the Protecta Evo Ambush Bait Station | DoMyOwn.com

To load the Protecta EVO Ambush Bait Station, first open the station using the key. Then remove the tray. Instal the vertical rods into the designated holes located on the removable tray. You might have use a small hammer to lightly tap them into place. The holes the rods fit in, might be a little …

Articles Blog

How to Open the Protecta Sidekick Rat Bait Station | DoMyOwn.com

How to Open the Protecta Sidekick Rat Bait Station | DoMyOwn.com

To open the Protecta Sidekick Rat Bait Station, insert the key into one of the locks, with the key prongs facing the inside edge of the station. Push the key STRAIGHT down firmly, then push the top of the key away from the station. Repeat the procedure with the second lock to open the station. …